Wednesday, September 7, 2016

Ms. Morris and the Quilted Sleeve

So I moved to the San Francisco area back in November and no lie, the temperature has changed by at most 10 degrees that entire time. My body still thinks its sometime in February. My wardrobe made for Boston and then Los Angeles weather, either hot or really, really cold is just not cutting it. I need a max 75 degrees and windy as f--- wardrobe.



Enter my new Morris from my pattern soulmate Grainline. Ms. Morris is perfect, I can throw her over my large collection of sleeveless blouses and wear them to work and through the wind tunnel that is San Francisco. The fabric is an amazing merino wool, nylon, lycra blend from my fabric store soulmate, The Fabric Store. This fabric is probably stretchier than what Jen recommends, but the nylon and lycra content give the fabric an amazing recovery and there has been absolutely no bagging whatsoever. I interfaced the facings, but not any of the body.

The pattern went together beautifully, minus some changes that were completely my fault. I did a combination FBA and general lengthening and even though I thought I transferred all changes to the facing, I did not and didn't have enough fabric to recut them. I then removed the added length from the front, so the general shape of the hem is not as angular as the original pattern.


My favorite part of this blazer is the double layered and quilted sleeves! I love them! (they are also the reason I didn't have enough fabric to recut the facings) The wrong side of the fabric is kind of nubby so it needed to be lined in some way and quilting them like this was by far the most badass. I used quilting adhesive to keep the sleeves together and my walking foot so that everything would be nice and smooth. Love that walking foot. The only problem is that the sleeves are now a bit too heavy for the jacket so I used some black twill tape on the shoulders to keep the sleeves from pulling them down.


If I could change something about this blazer, I would probably line the fronts instead of facing them. When the SF winds blow my jacket open and then catch the facings, this literally turns into a parachute. Also the added weight of a lining would hold the sleeves up better.